Abstract– low power, high-performance chips based on Complementary Metal-Oxide-Semiconductor

Abstract– This paper presents the design of high
speed 4-bit Arithmetic Logic Unit (ALU). ALU is one of the most important parts
of a processor which is designed to perform the arithmetic and logic
operations. The two important features are considered for designing an ALU are
increasing the speed and reducing power consumption. The overall performance of
the system will depend on the speed of the different modules used in the design.
However increasing the performance of ALU also increases the power consumption.
To achieve the low power consumption, high speed ALU is proposed using 1-bit
hybrid full adder. The performance of proposed ALU is verified using Tanner EDA
V13 with CMOS technology of 0.25µm. The simulated results show that the proposed
design reduces the number of transistors that will result in lesser area occupation
and reduces the power consumption comparing with the existing ALU’s.

Key terms
: ALU, Hybrid adder, power consumption,
Tanner.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

I.                    
INTRODUCTION

Portable devices such as mobile phones,
notebooks, laptops etc. use batteries for their operations. The most important
feature of modern electronics is low power and energy efficient active block
that set up the implementation of all devices that are operated by battery. In
a modern electronics, designing of accurate and fast arithmetic circuit which
leads to long lasting battery operated designs. Arithmetic circuits are the
significant building block in Very Large Scale Integrated (VLSI) circuits and
efficient implementation of these circuits will enhance the performance of the
entire system. The Arithmetic Logic Unit (ALU)
implements
the basic arithmetic and logical operation. ALU
is a fundamental component of all CPU and it is an integral part of the execution
unit. CPU can be more powerful, but it also can
consume more energy and creates more heat depending on how the ALU is designed. Therefore, it is important to
balance between power consumption, speed and complexity of the ALU. At high speed, the CPU consumes more power and
power dissipation is high. There are many different power reducing techniques
being used to design low power, high-performance chips based on Complementary
Metal-Oxide-Semiconductor (CMOS)
such as reducing voltage, load capacitance or switching frequency of the output
node. By reducing the supply voltage (Vdd), the power consumption is
minimized which results in quadratic improvement in the power dissipation of a CMOS circuit.